The AccuTemp P61201D060 DBL is a propane, connectionless Evolution steamer set that stacks two six pan cavities on a stainless steel stand. Because it is connectionless, it needs no water line and no drain line, so you can place it almost anywhere a gas and power connection is available. Each cavity produces convection steam without a boiler using AccuTemp's patented Steam Vector Technology, which creates steam inside the cooking cavity with no moving parts and no heating components exposed to water.
This double stacked configuration is built for high volume kitchens that run on propane and for locations where plumbing is limited or expensive to run. It fits schools, hospitals and care facilities, military and correctional foodservice, food trucks and remote sites, and busy restaurants that value consistent batch to batch results. Each cavity is powered by its own heavy duty stainless steel power burner rated at 50,000 BTU per hour and fills from a 2.5 gallon reservoir, using less than one gallon of water per hour.
Because the Evolution needs no water filtration, treatment, or deliming, and carries no warranty exclusions for water quality, it keeps utility and maintenance costs low even in hard water areas. Each cavity has a reinforced 304 stainless steel interior, a heavy duty one piece field reversible door, a front mounted drain valve, and indicator lights for low water, high water, and over temperature.
Key Features
- Connectionless design needs no water line and no drain line, only gas and power.
- Runs on propane with two heavy duty stainless steel power burners, each rated at 50,000 BTU per hour.
- Two stacked six pan cavities double your steaming capacity without adding floor space.
- Patented Steam Vector Technology in each cavity produces convection steam with no moving parts.
- Run both cavities independently to cook and hold at the same time.
- Uses less than one gallon of water per hour per cavity from a 2.5 gallon reservoir.
- No water filtration, treatment, or deliming, and no warranty exclusions for water quality.
- Reinforced 304 stainless steel cavities with heavy duty one piece field reversible doors.
- Includes a stainless steel support stand, plus digital controls and independent programmable timers on each cavity.
Specifications
| Model Number | P61201D060 DBL |
| Fuel Type | Propane |
| Configuration | Two double stacked, stand mounted 6 pan units, connectionless |
| Voltage/Phase (controls) | 120V, single phase, 60hz per cavity |
| Amps | 1 per cavity |
| Wattage | Not applicable, gas heated |
| Maximum Gas Input | 50,000 BTU per hour per cavity (100,000 BTU per hour total) |
| Gas Operating Pressure | 10.0 inches water column |
| Gas Connection | 1/2 inch NPT per cavity, 3/4 inch gas line required |
| NEMA Plug | 5-15 three prong (one per cavity) |
| Water Connection | None required, connectionless with manual reservoir fill |
| Pan Capacity | 12 full size #200 pans (12x20x2.5 inches) or 8 full size #400 pans (12x20x4 inches) across both cavities |
| Water Usage | Less than 1 gallon per hour per cavity from a 2.5 gallon reservoir each |
| Cavity Material | Reinforced 304 stainless steel |
| Dimensions | Not Specified |
| Weight | Not Specified |
| Warranty | One year parts and labor, two years for K through 12 schools, plus Lifetime Service and Support Guarantee |
| Country of Origin | Made in USA |
| Certifications | UL Listed (ANSI Z83.11), UL EPH Sanitation (NSF 4), Energy Star qualified |
What's Included
- Two P61201D060 propane, connectionless Evolution steamer cavities, double stacked.
- Stainless steel support stand.
- Two 5 foot power cords with NEMA 5-15 three prong plugs.
- One piece field reversible doors and dishwasher safe one piece wire pan racks.
- Optional accessories not included: casters, steam condenser unit, solid and perforated hotel pans, and gas quick disconnect hose kit.
Manufacturer Information
Spec Sheet: N6/P6 Double Stacked Connectionless Evolution Spec Sheet (PDF). Owner's and Installation Manual: Evolution Gas Steamer Owner's Manual (PDF).
Shipping & Returns
This item ships by freight on a pallet and requires a loading dock, forklift, or liftgate service to unload. If you do not have dock access, request liftgate delivery when you place your order. Without it, the carrier may be unable to leave the item at your location. Freight shipping cost is calculated per order based on the item's weight, dimensions, and your delivery location, and will be calculated at checkout or communicated to you in advance. All freight deliveries require a signature. Please inspect the shipment for visible damage before signing the delivery receipt or Bill of Lading, and report any damage within 24 hours, with photos, to info@culinaryprofis.com. Our standard Return and Refund Policy applies once the item has shipped.
Warranty Information
This steamer set is covered by AccuTemp's one year parts and labor warranty, extended to two years for K through 12 schools. There are no warranty exclusions for water quality, so hard water conditions will not void coverage. Every unit also includes AccuTemp's Lifetime Service and Support Guarantee, which gives you access to an AccuTemp support representative seven days a week whether or not the unit is in warranty.
Need help before ordering?
Call or text us at (914) 278-1007. Real support, no bots.